SKAARHOJ ETH-GPI Link Dual Option

Product Highlights

• 2x DB25 Connector Configuration
• 16x Channels Input GPI
• 16x Channel Output GPO
• Ethernet with PoE
• UniSketch OS

The SKAARHOJ GPI Link Dual features a GPIO control that can set up an I/O device. Connect and control anything from your tally lamps, trigger ATEM switcher routines, control a HyperDeck, change Scopes on a SmartScope Duo and route inputs/outputs on a VideoHub. You can connect and control up to 8 devices at the same time.

Broadcast I/O

The GPIO controller lets you control anything from your tally lamps, a foot switch over ethernet or integration with existing systems such as CCUs, video routing and other video switchers or video infrastructure units. There are almost endless possibilities.

The general-purpose I/O controllers offer 8/16 inputs and 8/16 outputs, all electrically separated with quality relays and optocouplers. GPO is implemented with relays shorting to GND. GPI implemented with optical isolators shorted to GND.

The DB25 connector configuration is similar to the Blackmagic Design GPI & Tally Interface. If you fancy a breakout board for the DB25 connector with Phoenix connectors then have a look at the Breakout Board.

Device Settings

The ETH-GPI Link runs UniSketch OS, which allows you to configure the device for multiple hardware devices such as the ATEM Switcher, HyperDeck, SmartScopes, VideoHubs, AJA KUMO Routers, vMix and so more. You can even configure the unit to control multiple hardware devices at the same time. The microprocessor SKAARDUINO Due inside the ETH-GPI Link allows connections to a maximum number of 8 devices.